Home page

Bearing life standard

Release time:

2024-02-03

The number of revolutions or hours that a bearing experiences before pitting occurs under a certain load is called the bearing life.

The life of a rolling bearing is defined in terms of the number of revolutions (or hours of operation at a given speed): a bearing within this life should experience initial fatigue damage (spalling or chipping) on any of its bearing rings or rolling elements. However, whether in the laboratory test or in actual use, can be clearly seen, in the same working conditions of the appearance of the same bearing, the actual life is very different. In addition, there are several different definitions of bearing "life", one of which is the so-called "working life", which indicates that the actual life of a bearing can be achieved before the damage is caused by wear, damage is usually not caused by fatigue, but by wear, corrosion, sealing Damage is usually not caused by fatigue, but by wear, corrosion, seal damage, etc.

In order to determine the criteria for bearing life, the bearing life is linked to reliability.

Due to manufacturing precision, material uniformity differences, even if the same material, the same size of the same batch of bearings, used in the same working conditions, the length of its life is not the same. If the statistical life of 1 unit, the longest relative life of 4 units, the shortest 0.1-0.2 units, the longest and shortest life ratio of 20-40 times. 90% of the bearings do not produce pitting corrosion, the number of revolutions or hours experienced is called the rated life of the bearing.

LATEST NEWS

Characteristics of needle roller bearings

Needle roller bearings are a versatile and efficient type of roller bearings that offer high load capacity, low friction, precision performance, and durability in a compact design. Their versatility, durability, and cost-effectiveness make them a popular choice for a wide range of applications across various industries.

2024-05-11

Precautions for the use of deep groove ball bearings

For deep groove ball bearings, the bearing load is too small during operation, which will cause sliding between the ball and the raceway, which will become the cause of scratches. This is especially true for large deep groove ball bearings with heavy ball and cage weights. In many cases, bearings will corrode. There are many reasons for bearing corrosion. The most common factors in our daily life are the following:

2024-05-09

Development of deep groove ball bearing industry program

Deep groove ball bearings, as an important mechanical component, are widely used in various fields. This paper will put forward some plans for the development of deep groove ball bearing industry.

2024-04-28

Inspection of bearing operation process

The normal temperature of the bearing will vary depending on the machine's heat capacity, heat dissipation, speed and rotation method. Thermal sensors can be used to monitor the operating temperature of bearings at any time, so that preparations and reminders can be made before an accident occurs.

2024-04-16

The causes of rolling bearing heat and its elimination methods

Bearing precision is low: choose the specified precision grade bearing. Spindle bending or box hole is not centered: repair the spindle or box.

2024-03-12

Maintenance and care of bearings

Dismantling of bearings is carried out for regular maintenance and bearing replacement. After disassembly, if the bearings continue to be used, or if it is necessary to check the status of the bearings, the disassembly should be carried out with the same care as when they are installed. Be careful not to damage the bearing parts, especially the disassembly of interference fit bearings, which are difficult to operate.

2024-02-24

Tel : +8613325113115
E-mail : nancy@sdhnzc.com
WhatApp : +8613325110597

Add : Huaiyin District, Jinan City, Shandong Province