Home page

Inspection of bearing operation process

Release time:

2024-04-16

The normal temperature of the bearing will vary depending on the machine's heat capacity, heat dissipation, speed and rotation method. Thermal sensors can be used to monitor the operating temperature of bearings at any time, so that preparations and reminders can be made before an accident occurs.

Bearing rolling sound: Use a sound detector to check the size and sound quality of the rolling sound of the running bearing. Even if the bearing is slightly scratched, it will emit abnormal and irregular sounds, and the sound detector can be very good. to solve this problem. If the lubrication and mounting parts are suitable, the bearing temperature will rise sharply and the temperature will rise abnormally. At this time, the operation must be stopped and necessary preventive measures must be taken. Based on a large amount of test data, Table 4-1 lists the average outer ring temperature of bearings in various machines when they are working for reference. Since the temperature is affected by lubrication, rotation speed, load and environment, the values in the table only represent the approximate temperature range.
Bearing vibration: Bearing vibration has a relatively obvious response to bearing damage. For example, these common problems such as indentation, rust, cracks, peeling, wear, etc. can be clearly felt during testing. Therefore, by using special bearing vibration A measuring instrument (frequency analyzer, etc.) can measure the size of the vibration, and the specific abnormality can be inferred from the frequency analysis. The measured values vary depending on the usage conditions of the bearings or the installation position of the sensor. Therefore, certain operations need to be performed on the measured values of each machine in advance to determine the final data.
Bearing temperature: The temperature of the bearing. Some bearing temperatures can be measured. It would be more appropriate if the oil hole can be used to directly measure the temperature of the outer ring of the bearing. Usually, the temperature of the bearing begins to rise slowly with operation, and reaches a relatively stable level after a few hours. The normal temperature of the bearing will vary depending on the machine's heat capacity, heat dissipation, speed and rotation method. Thermal sensors can be used to monitor the operating temperature of bearings at any time, so that preparations and reminders can be made before an accident occurs.

LATEST NEWS

Characteristics of needle roller bearings

Needle roller bearings are a versatile and efficient type of roller bearings that offer high load capacity, low friction, precision performance, and durability in a compact design. Their versatility, durability, and cost-effectiveness make them a popular choice for a wide range of applications across various industries.

2024-05-11

Precautions for the use of deep groove ball bearings

For deep groove ball bearings, the bearing load is too small during operation, which will cause sliding between the ball and the raceway, which will become the cause of scratches. This is especially true for large deep groove ball bearings with heavy ball and cage weights. In many cases, bearings will corrode. There are many reasons for bearing corrosion. The most common factors in our daily life are the following:

2024-05-09

Development of deep groove ball bearing industry program

Deep groove ball bearings, as an important mechanical component, are widely used in various fields. This paper will put forward some plans for the development of deep groove ball bearing industry.

2024-04-28

Inspection of bearing operation process

2024-04-16

The causes of rolling bearing heat and its elimination methods

Bearing precision is low: choose the specified precision grade bearing. Spindle bending or box hole is not centered: repair the spindle or box.

2024-03-12

Maintenance and care of bearings

Dismantling of bearings is carried out for regular maintenance and bearing replacement. After disassembly, if the bearings continue to be used, or if it is necessary to check the status of the bearings, the disassembly should be carried out with the same care as when they are installed. Be careful not to damage the bearing parts, especially the disassembly of interference fit bearings, which are difficult to operate.

2024-02-24

Tel : +8613325113115
E-mail : nancy@sdhnzc.com
WhatApp : +8613325110597

Add : Huaiyin District, Jinan City, Shandong Province